So, your warning is you want to avoid contact with the sharp
edges on the star tracker hood, frame clevises,
and little boxes on the outside of the NICER
hardware.
And then some cautions: avoid tool tether contact
with the reflective film inside that sunshades.
Remember the super fragile part?
And avoid loads into NICER particularly in the station forward direction,
which is towards your feet to prevent it from popping out of the hook.
And copy
that.
And from now I’m going one, two, three, four,
five.
So, five in from echo, starting from the left-hand side.
And I know your number system it starts from the right-hand side, but
I find that kind of confusing when I'm looking at it this way,
if you understand what I mean.
Yeah, it did.
It fell to the bottom of the pool and the safety tether reel is bringing it back in.
I've got control of the tool now
and. And we do want to do a pull
test on each of those wedges before we remove them from the caddy
and then another pull test when you install them
Copy that.
Okay. So I'm
looking at row echo
five, five in
from row echo in the 9 o’clock position.
Yeah, I concur.
And I’m moving myself a little closer using the BRT.
Okay.
OK, it is locked.
Okay.
Patch number one is in, and let me verify it's row
echo one, two, three, four, five
over from from row echo in the 3 o’clock position.
You said 3 o’clock position? Should be 9.
Excuse me, the 9 o’clock position.
Okay.
So, you think using like a clock number,
you think would be better than a
like letter like we have currently.
For the way my brain works, you need to
And I'm looking at my feet again.
So, this is going to be row
bravo,
number seven, at 3 o’clock.
Good words.
Okay.