\r
Credit: NASA/Sophia Roberts", "items": [ { "id": 416870, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088082, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVac_59.94_4k.00001_print.jpg", "filename": "BurstCube_ThermalVac_59.94_4k.00001_print.jpg", "media_type": "Image", "alt_text": "This video shows NASA engineers securing the BurstCube satellite in a thermal vacuum chamber for testing. The first shot shows a thermal vacuum chamber lab at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The second clip shows Julie Cox (NASA) and Seth Abramczyk (NASA) moving BurstCube, still in a clear protective case, from a table to the chamber platform. The next shot shows Cox and Abramczyk talking over the spacecraft, now without the covering. NASA engineers Franklin Robinson and Elliot Schwartz look on. In the fourth and fifth shots, all four engineers work to move BurstCube into position. In the sixth shot, Cox props one of the solar panels slightly open so they can test it when the spacecraft is in the chamber. In the next shot, Cox, Abramczyk, and Robinson make more adjustments. The eighth shot shows one side of BurstCube, which is engraved with the mission’s logo and the names of partner institutions. The following two clips show wider views of the spacecraft on the chamber platform. The eleventh shot shows Abramczyk and Cox typing at their computers. The twelfth shot shows a computer screen with a feed from a camera on the chamber platform. A smiling Abramczyk pops in and out of view. The thirteenth clip shows Cox deploying one solar panel with Abramczyk and Robinson in the background. The fourteenth shot shows Schwartz, Robinson, Abramczyk, and Colton Cohill (NASA) moving the top of the chamber into place. The fifteenth through nineteenth shots show the engineers steadying the lid as it lowers slowly into place. Shot twenty shows Schwartz securing the top of the lid. Shot twenty-one shows a pan of the sealed chamber. The final shot shows a data readout on a computer screen.\r\rCredit: NASA/Sophia Roberts", "width": 1024, "height": 540, "pixels": 552960 } }, { "id": 416871, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088083, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVac_59.94_4k.00001_searchweb.png", "filename": "BurstCube_ThermalVac_59.94_4k.00001_searchweb.png", "media_type": "Image", "alt_text": "This video shows NASA engineers securing the BurstCube satellite in a thermal vacuum chamber for testing. The first shot shows a thermal vacuum chamber lab at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The second clip shows Julie Cox (NASA) and Seth Abramczyk (NASA) moving BurstCube, still in a clear protective case, from a table to the chamber platform. The next shot shows Cox and Abramczyk talking over the spacecraft, now without the covering. NASA engineers Franklin Robinson and Elliot Schwartz look on. In the fourth and fifth shots, all four engineers work to move BurstCube into position. In the sixth shot, Cox props one of the solar panels slightly open so they can test it when the spacecraft is in the chamber. In the next shot, Cox, Abramczyk, and Robinson make more adjustments. The eighth shot shows one side of BurstCube, which is engraved with the mission’s logo and the names of partner institutions. The following two clips show wider views of the spacecraft on the chamber platform. The eleventh shot shows Abramczyk and Cox typing at their computers. The twelfth shot shows a computer screen with a feed from a camera on the chamber platform. A smiling Abramczyk pops in and out of view. The thirteenth clip shows Cox deploying one solar panel with Abramczyk and Robinson in the background. The fourteenth shot shows Schwartz, Robinson, Abramczyk, and Colton Cohill (NASA) moving the top of the chamber into place. The fifteenth through nineteenth shots show the engineers steadying the lid as it lowers slowly into place. Shot twenty shows Schwartz securing the top of the lid. Shot twenty-one shows a pan of the sealed chamber. The final shot shows a data readout on a computer screen.\r\rCredit: NASA/Sophia Roberts", "width": 320, "height": 180, "pixels": 57600 } }, { "id": 416872, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088084, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVac_59.94_4k.00001_web.png", "filename": "BurstCube_ThermalVac_59.94_4k.00001_web.png", "media_type": "Image", "alt_text": "This video shows NASA engineers securing the BurstCube satellite in a thermal vacuum chamber for testing. The first shot shows a thermal vacuum chamber lab at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The second clip shows Julie Cox (NASA) and Seth Abramczyk (NASA) moving BurstCube, still in a clear protective case, from a table to the chamber platform. The next shot shows Cox and Abramczyk talking over the spacecraft, now without the covering. NASA engineers Franklin Robinson and Elliot Schwartz look on. In the fourth and fifth shots, all four engineers work to move BurstCube into position. In the sixth shot, Cox props one of the solar panels slightly open so they can test it when the spacecraft is in the chamber. In the next shot, Cox, Abramczyk, and Robinson make more adjustments. The eighth shot shows one side of BurstCube, which is engraved with the mission’s logo and the names of partner institutions. The following two clips show wider views of the spacecraft on the chamber platform. The eleventh shot shows Abramczyk and Cox typing at their computers. The twelfth shot shows a computer screen with a feed from a camera on the chamber platform. A smiling Abramczyk pops in and out of view. The thirteenth clip shows Cox deploying one solar panel with Abramczyk and Robinson in the background. The fourteenth shot shows Schwartz, Robinson, Abramczyk, and Colton Cohill (NASA) moving the top of the chamber into place. The fifteenth through nineteenth shots show the engineers steadying the lid as it lowers slowly into place. Shot twenty shows Schwartz securing the top of the lid. Shot twenty-one shows a pan of the sealed chamber. The final shot shows a data readout on a computer screen.\r\rCredit: NASA/Sophia Roberts", "width": 320, "height": 168, "pixels": 53760 } }, { "id": 416873, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088085, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVac_59.94_4k.00001_thm.png", "filename": "BurstCube_ThermalVac_59.94_4k.00001_thm.png", "media_type": "Image", "alt_text": "This video shows NASA engineers securing the BurstCube satellite in a thermal vacuum chamber for testing. The first shot shows a thermal vacuum chamber lab at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The second clip shows Julie Cox (NASA) and Seth Abramczyk (NASA) moving BurstCube, still in a clear protective case, from a table to the chamber platform. The next shot shows Cox and Abramczyk talking over the spacecraft, now without the covering. NASA engineers Franklin Robinson and Elliot Schwartz look on. In the fourth and fifth shots, all four engineers work to move BurstCube into position. In the sixth shot, Cox props one of the solar panels slightly open so they can test it when the spacecraft is in the chamber. In the next shot, Cox, Abramczyk, and Robinson make more adjustments. The eighth shot shows one side of BurstCube, which is engraved with the mission’s logo and the names of partner institutions. The following two clips show wider views of the spacecraft on the chamber platform. The eleventh shot shows Abramczyk and Cox typing at their computers. The twelfth shot shows a computer screen with a feed from a camera on the chamber platform. A smiling Abramczyk pops in and out of view. The thirteenth clip shows Cox deploying one solar panel with Abramczyk and Robinson in the background. The fourteenth shot shows Schwartz, Robinson, Abramczyk, and Colton Cohill (NASA) moving the top of the chamber into place. The fifteenth through nineteenth shots show the engineers steadying the lid as it lowers slowly into place. Shot twenty shows Schwartz securing the top of the lid. Shot twenty-one shows a pan of the sealed chamber. The final shot shows a data readout on a computer screen.\r\rCredit: NASA/Sophia Roberts", "width": 80, "height": 40, "pixels": 3200 } }, { "id": 416865, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088077, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVac_59.94_4k.mp4", "filename": "BurstCube_ThermalVac_59.94_4k.mp4", "media_type": "Movie", "alt_text": "This video shows NASA engineers securing the BurstCube satellite in a thermal vacuum chamber for testing. The first shot shows a thermal vacuum chamber lab at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The second clip shows Julie Cox (NASA) and Seth Abramczyk (NASA) moving BurstCube, still in a clear protective case, from a table to the chamber platform. The next shot shows Cox and Abramczyk talking over the spacecraft, now without the covering. NASA engineers Franklin Robinson and Elliot Schwartz look on. In the fourth and fifth shots, all four engineers work to move BurstCube into position. In the sixth shot, Cox props one of the solar panels slightly open so they can test it when the spacecraft is in the chamber. In the next shot, Cox, Abramczyk, and Robinson make more adjustments. The eighth shot shows one side of BurstCube, which is engraved with the mission’s logo and the names of partner institutions. The following two clips show wider views of the spacecraft on the chamber platform. The eleventh shot shows Abramczyk and Cox typing at their computers. The twelfth shot shows a computer screen with a feed from a camera on the chamber platform. A smiling Abramczyk pops in and out of view. The thirteenth clip shows Cox deploying one solar panel with Abramczyk and Robinson in the background. The fourteenth shot shows Schwartz, Robinson, Abramczyk, and Colton Cohill (NASA) moving the top of the chamber into place. The fifteenth through nineteenth shots show the engineers steadying the lid as it lowers slowly into place. Shot twenty shows Schwartz securing the top of the lid. Shot twenty-one shows a pan of the sealed chamber. The final shot shows a data readout on a computer screen.\r\rCredit: NASA/Sophia Roberts", "width": 4096, "height": 2160, "pixels": 8847360 } }, { "id": 416885, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088095, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVac_59.94_4k.webm", "filename": "BurstCube_ThermalVac_59.94_4k.webm", "media_type": "Movie", "alt_text": "This video shows NASA engineers securing the BurstCube satellite in a thermal vacuum chamber for testing. The first shot shows a thermal vacuum chamber lab at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The second clip shows Julie Cox (NASA) and Seth Abramczyk (NASA) moving BurstCube, still in a clear protective case, from a table to the chamber platform. The next shot shows Cox and Abramczyk talking over the spacecraft, now without the covering. NASA engineers Franklin Robinson and Elliot Schwartz look on. In the fourth and fifth shots, all four engineers work to move BurstCube into position. In the sixth shot, Cox props one of the solar panels slightly open so they can test it when the spacecraft is in the chamber. In the next shot, Cox, Abramczyk, and Robinson make more adjustments. The eighth shot shows one side of BurstCube, which is engraved with the mission’s logo and the names of partner institutions. The following two clips show wider views of the spacecraft on the chamber platform. The eleventh shot shows Abramczyk and Cox typing at their computers. The twelfth shot shows a computer screen with a feed from a camera on the chamber platform. A smiling Abramczyk pops in and out of view. The thirteenth clip shows Cox deploying one solar panel with Abramczyk and Robinson in the background. The fourteenth shot shows Schwartz, Robinson, Abramczyk, and Colton Cohill (NASA) moving the top of the chamber into place. The fifteenth through nineteenth shots show the engineers steadying the lid as it lowers slowly into place. Shot twenty shows Schwartz securing the top of the lid. Shot twenty-one shows a pan of the sealed chamber. The final shot shows a data readout on a computer screen.\r\rCredit: NASA/Sophia Roberts", "width": 0, "height": 0, "pixels": 0 } } ], "extra_data": {} }, { "id": 373027, "url": "https://svs.gsfc.nasa.gov/14489/#media_group_373027", "widget": "Single image", "title": "", "caption": "", "description": "Julie Cox (NASA) and Justin Clavette (SSAI) work on the BurstCube spacecraft ahead of testing in a thermal vacuum chamber at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, while Robert Moss (NASA) looks on.\r
\r
Credit: NASA/Sophia Roberts\r
\r
Alt text: This photograph shows two people working on the BurstCube satellite. \r
\r
Descriptive text: A woman in a long-sleeved red jacket and blue gloves leans over a shiny rectangular spacecraft. The spacecraft sits on a circular platform covered in wires. To the left of her is a man in a blue long-sleeved jacket and gloves. He’s looking down at something out of frame. They are observed by a third man in a blue jacket. Behind them stretches a lab space with white walls, ductwork in the ceiling, and a variety of lab equipment. ", "items": [ { "id": 416866, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088078, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVacuumTest-09.jpg", "filename": "BurstCube_ThermalVacuumTest-09.jpg", "media_type": "Image", "alt_text": "Julie Cox (NASA) and Justin Clavette (SSAI) work on the BurstCube spacecraft ahead of testing in a thermal vacuum chamber at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, while Robert Moss (NASA) looks on.\r\rCredit: NASA/Sophia Roberts\r\rAlt text: This photograph shows two people working on the BurstCube satellite. \r\rDescriptive text: A woman in a long-sleeved red jacket and blue gloves leans over a shiny rectangular spacecraft. The spacecraft sits on a circular platform covered in wires. To the left of her is a man in a blue long-sleeved jacket and gloves. He’s looking down at something out of frame. They are observed by a third man in a blue jacket. Behind them stretches a lab space with white walls, ductwork in the ceiling, and a variety of lab equipment. ", "width": 5472, "height": 3648, "pixels": 19961856 } } ], "extra_data": {} }, { "id": 373028, "url": "https://svs.gsfc.nasa.gov/14489/#media_group_373028", "widget": "Single image", "title": "", "caption": "", "description": "NASA engineers Julie Cox, Seth Abramczyk, and Franklin Robinson work to adjust the BurstCube spacecraft ahead of thermal vacuum testing at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. \r
\r
Credit: NASA/Sophia Roberts\r
\r
Alt text: This photograph shows three people working on a spacecraft in a lab.\r
\r
Descriptive text: In this image, two men in blue long-sleeved jackets stand on the left-hand side. One is holding one side of a smally shiny spacecraft. Across from him a woman in a long-sleeved red jacket is holding the other end. The spacecraft is standing on a circular platform in a laboratory with gray ductwork on the walls and a variety of equipment. ", "items": [ { "id": 416867, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088079, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVacuumTest-21.jpg", "filename": "BurstCube_ThermalVacuumTest-21.jpg", "media_type": "Image", "alt_text": "NASA engineers Julie Cox, Seth Abramczyk, and Franklin Robinson work to adjust the BurstCube spacecraft ahead of thermal vacuum testing at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. \r\rCredit: NASA/Sophia Roberts\r\rAlt text: This photograph shows three people working on a spacecraft in a lab.\r\rDescriptive text: In this image, two men in blue long-sleeved jackets stand on the left-hand side. One is holding one side of a smally shiny spacecraft. Across from him a woman in a long-sleeved red jacket is holding the other end. The spacecraft is standing on a circular platform in a laboratory with gray ductwork on the walls and a variety of equipment. ", "width": 5472, "height": 3648, "pixels": 19961856 } } ], "extra_data": {} }, { "id": 373029, "url": "https://svs.gsfc.nasa.gov/14489/#media_group_373029", "widget": "Single image", "title": "", "caption": "", "description": "NASA engineers Franklin Robinson, Elliot Schwartz, and Colton Cohill secure the lid of a thermal vacuum chamber at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The BurstCube team used the chamber to test how the satellite will operate in conditions like those it will experience in space. \r
\r
Credit: NASA/Sophia Roberts\r
\r
Alt text: This image shows engineers securing the lid of a thermal vacuum chamber. \r
\r
Descriptive text: This photograph shows three men in long-sleeved blue jackets, blue gloves, and red hard hats. They’re standing around a thermal vacuum chamber, which has a square silver base and a conical white top. On the left, a man hands a wrench to another man, who is standing on the base of the chamber. On the right, the third man looks up at the top of the chamber. They are in a lab with a high ceiling and lots of electrical equipment. An American flag hangs from the ceiling.", "items": [ { "id": 416868, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088080, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVacuumTest-01.jpg", "filename": "BurstCube_ThermalVacuumTest-01.jpg", "media_type": "Image", "alt_text": "NASA engineers Franklin Robinson, Elliot Schwartz, and Colton Cohill secure the lid of a thermal vacuum chamber at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The BurstCube team used the chamber to test how the satellite will operate in conditions like those it will experience in space. \r\rCredit: NASA/Sophia Roberts\r\rAlt text: This image shows engineers securing the lid of a thermal vacuum chamber. \r\rDescriptive text: This photograph shows three men in long-sleeved blue jackets, blue gloves, and red hard hats. They’re standing around a thermal vacuum chamber, which has a square silver base and a conical white top. On the left, a man hands a wrench to another man, who is standing on the base of the chamber. On the right, the third man looks up at the top of the chamber. They are in a lab with a high ceiling and lots of electrical equipment. An American flag hangs from the ceiling.", "width": 3648, "height": 5472, "pixels": 19961856 } } ], "extra_data": {} }, { "id": 373030, "url": "https://svs.gsfc.nasa.gov/14489/#media_group_373030", "widget": "Single image", "title": "", "caption": "", "description": "This photo shows engineers attaching BurstCube to the platform of a thermal vacuum chamber at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.\r
\r
Credit: NASA/Sophia Roberts\r
\r
Alt text: This photograph shows four people preparing the BurstCube satellite for thermal vacuum testing. \r
\r
Descriptive text: This image shows three men and a woman adjusting the BurstCube satellite on a small platform in a lab. The men wear long-sleeved blue jackets, the woman wears a red one. They all wear gloves. The team stands in a circle around the satellite. The satellite is a small rectangular box with a black solar panel on top, and the people are placing it on the platform. White pipes and machinery take up the foreground on the left-hand side. In the background of the cluttered lab with large tool chests, a ladder on the wall, and office chares. Other people look on as the team works.", "items": [ { "id": 416869, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088081, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVacuumTest-07.jpg", "filename": "BurstCube_ThermalVacuumTest-07.jpg", "media_type": "Image", "alt_text": "This photo shows engineers attaching BurstCube to the platform of a thermal vacuum chamber at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.\r\rCredit: NASA/Sophia Roberts\r\rAlt text: This photograph shows four people preparing the BurstCube satellite for thermal vacuum testing. \r\rDescriptive text: This image shows three men and a woman adjusting the BurstCube satellite on a small platform in a lab. The men wear long-sleeved blue jackets, the woman wears a red one. They all wear gloves. The team stands in a circle around the satellite. The satellite is a small rectangular box with a black solar panel on top, and the people are placing it on the platform. White pipes and machinery take up the foreground on the left-hand side. In the background of the cluttered lab with large tool chests, a ladder on the wall, and office chares. Other people look on as the team works.", "width": 5472, "height": 3648, "pixels": 19961856 } } ], "extra_data": {} } ], "studio": "gms", "funding_sources": [ "PAO" ], "credits": [ { "role": "Producer", "people": [ { "name": "Sophia Roberts", "employer": "Advocates in Manpower Management, Inc." } ] }, { "role": "Science writer", "people": [ { "name": "Jeanette Kazmierczak", "employer": "University of Maryland College Park" } ] } ], "missions": [ "CubeSats" ], "series": [], "tapes": [], "papers": [], "datasets": [], "nasa_science_categories": [ "Universe" ], "keywords": [ "Ast", "Astronomy", "Astrophysics", "Gamma Ray Burst", "Neutron Star", "Space", "Universe" ], "recommended_pages": [], "related": [ { "id": 14608, "url": "https://svs.gsfc.nasa.gov/14608/", "page_type": "Produced Video", "title": "BurstCube Deploys from International Space Station", "description": "The shoebox-sized BurstCube and SNOOPI (Signals of Opportunity P-band Investigation) satellites entered low-Earth orbit from the International Space Station on April 18, 2024.BurstCube will study gamma-ray bursts, the universe’s most powerful explosions. SNOOPI will demonstrate technology for measuring soil moisture. These CubeSats launched to the space station aboard SpaceX’s 30th Commercial Resupply Services mission on March 21, 2024 || ", "release_date": "2024-06-24T13:00:00-04:00", "update_date": "2024-06-24T13:49:27.017597-04:00", "main_image": { "id": 1093823, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014600/a014608/BurstCube_Deployment_1_print.jpg", "filename": "BurstCube_Deployment_1_print.jpg", "media_type": "Image", "alt_text": "This time-lapse video, taken from the International Space Station, shows BurstCube and SNOOPI (Signals of Opportunity P-band Investigation) entering low-Earth orbit on April 18, 2024. BurstCube emerges first from the white deployer labeled “Nanoracks,” followed by SNOOPI. They begin to separate as they sail past one of the station’s solar arrays. \r\rCredit: NASA/Matthew Dominick\r\rAlt text: Time-lapse video of BurstCube and SNOOPI deployment. \r\rDescriptive text: This time-lapse video strings together photos taken from the International Space Station. Two black and gold boxes emerge from a larger white box labeled “Nanoracks.” They’re very close, but separate as they zoom past two long, rectangular, gold-and-black panels. Earth is in the background, a blue sky streaked with white clouds. The timelapse animation is a little choppy. \r", "width": 1024, "height": 575, "pixels": 588800 } }, { "id": 14487, "url": "https://svs.gsfc.nasa.gov/14487/", "page_type": "Produced Video", "title": "BurstCube Completes Magnetic Calibration", "description": "BurstCube is a mission developed at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. It is expected to launch in March 2024. This CubeSat will detect short gamma-ray bursts, brief flashes of the highest-energy form of light. Dense stellar remnants called neutron stars create these bursts when they collide with other neutron stars or black holes. Short gamma-ray bursts, which last less than 2 seconds, are important sources for gravitational wave discoveries and multimessenger astronomy. BurstCube will use Earth’s magnetic field to orientate itself as it scans the sky. To do so, the mission team had to map the spacecraft’s own magnetic field using a special facility at NASA’s Wallops Flight Facility in Virginia. The magnetic calibration chamber generates a known magnetic field that cancels out Earth’s. The team's measurements of BurstCube’s field in the chamber will help figure out where the satellite is pointing once in space, so scientists can locate gamma-ray bursts and tell other observatories where to look. || ", "release_date": "2023-12-18T13:00:00-05:00", "update_date": "2023-12-14T15:29:21.322571-05:00", "main_image": { "id": 1088056, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration1080.01260_print.jpg", "filename": "BurstCube_MagneticCalibration1080.01260_print.jpg", "media_type": "Image", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 1024, "height": 576, "pixels": 589824 } }, { "id": 14488, "url": "https://svs.gsfc.nasa.gov/14488/", "page_type": "Produced Video", "title": "BurstCube Gets Its Solar Panels", "description": "Engineers work on the BurstCube mission’s solar panels in this video. The first shot pans across the spacecraft as it rests on a table, panels unfolded. The second shot starts close to the spacecraft, then pulls back. The third shot shows NASA engineers Julie Cox and Kate Gasaway attaching one of the panels. The fourth shot shows one of the unattached panels sitting on a piece of foil on a blue tabletop. The fifth shot is a wider view of the unattached panel with Cox in view. The sixth and seventh shots show Cox and Gasaway attaching the second panel to the other side of the spacecraft, from the side and above, respectively. The final shot shows a test deployment of the solar panels. Credit: NASA/Sophia Roberts || BurstCube_Solar_Panel_Install_4k.00060_print.jpg (1024x540) [110.8 KB] || BurstCube_Solar_Panel_Install_4k.00060_searchweb.png (320x180) [65.1 KB] || BurstCube_Solar_Panel_Install_4k.00060_thm.png (80x40) [5.4 KB] || BurstCube_Solar_Panel_Install_4k.webm (4096x2160) [28.3 MB] || BurstCube_Solar_Panel_Install_Clips4k_ProRes.mov (4096x2160) [7.6 GB] || BurstCube_Solar_Panel_Install_4k.mp4 (4096x2160) [1.0 GB] || ", "release_date": "2023-12-18T11:00:00-05:00", "update_date": "2023-12-18T11:44:11.281520-05:00", "main_image": { "id": 1088068, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014488/BurstCube_Solar_Panel_Install_4k.02520_print.jpg", "filename": "BurstCube_Solar_Panel_Install_4k.02520_print.jpg", "media_type": "Image", "alt_text": "", "width": 1024, "height": 540, "pixels": 552960 } }, { "id": 14490, "url": "https://svs.gsfc.nasa.gov/14490/", "page_type": "Produced Video", "title": "BurstCube Completes an Open-Sky Test", "description": "This video shows engineers conducting an open-sky test of the BurstCube satellite’s GPS at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The first shot shows Benjamin Nold (NASA) and Justin Clavette (SSAI) sitting around the spacecraft on a rooftop while Kate Gasaway (NASA) works in the background. The second shot shows Gasaway and Clavette looking at a laptop in the background, with BurstCube in the foreground. The third shot shows birds landing on an antenna on the rooftop. The fourth shot shows Clavette and Nold crouched next to the BurstCube satellite. The fifth shot shows Gasaway typing on the laptop. The sixth shot is a closer view of Gasaway and Clavette looking at the laptop. The eighth shot shows some of the electronics used to monitor the spacecraft. The ninth shot shows the data readout from the spacecraft on the laptop. The final shots show birds flying over the rooftop. Credit: NASA/Sophia Roberts || Open_Air_test_4k.01440_print.jpg (1024x540) [103.1 KB] || Open_Air_test_4k.01440_searchweb.png (320x180) [74.5 KB] || Open_Air_test_4k.01440_web.png (320x168) [70.2 KB] || Open_Air_test_4k.01440_thm.png (80x40) [5.8 KB] || Open_Air_test_4k.webm (4096x2160) [27.4 MB] || Open_Air_test_4k.mp4 (4096x2160) [891.4 MB] || BurstCube_Open_Air_test_4k_ProRes.mov (4096x2160) [6.5 GB] || ", "release_date": "2023-12-18T11:00:00-05:00", "update_date": "2023-12-18T12:04:44.846787-05:00", "main_image": { "id": 1088091, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014490/Open_Air_test_4k.01440_print.jpg", "filename": "Open_Air_test_4k.01440_print.jpg", "media_type": "Image", "alt_text": "This video shows engineers conducting an open-sky test of the BurstCube satellite’s GPS at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The first shot shows Benjamin Nold (NASA) and Justin Clavette (SSAI) sitting around the spacecraft on a rooftop while Kate Gasaway (NASA) works in the background. The second shot shows Gasaway and Clavette looking at a laptop in the background, with BurstCube in the foreground. The third shot shows birds landing on an antenna on the rooftop. The fourth shot shows Clavette and Nold crouched next to the BurstCube satellite. The fifth shot shows Gasaway typing on the laptop. The sixth shot is a closer view of Gasaway and Clavette looking at the laptop. The eighth shot shows some of the electronics used to monitor the spacecraft. The ninth shot shows the data readout from the spacecraft on the laptop. The final shots show birds flying over the rooftop. \r\rCredit: NASA/Sophia Roberts", "width": 1024, "height": 540, "pixels": 552960 } }, { "id": 14167, "url": "https://svs.gsfc.nasa.gov/14167/", "page_type": "Produced Video", "title": "BurstCube Integration", "description": "BurstCube is a mission under development at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. This CubeSat will detect short gamma-ray bursts, which are important sources for gravitational wave discoveries and multimessenger astronomy. The satellite is expected to launch in March 2024. || ", "release_date": "2022-10-31T11:00:00-04:00", "update_date": "2023-12-15T11:44:00.427620-05:00", "main_image": { "id": 855111, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014100/a014167/1_-BurstCube_Chip_print.jpg", "filename": "1_-BurstCube_Chip_print.jpg", "media_type": "Image", "alt_text": "An individual circuit board rests on a lab bench. The BurstCube mission will use these boards to process data collected from gamma-ray bursts, the most energetic explosions in the cosmos. Credit: NASA/Sophia Roberts", "width": 1024, "height": 682, "pixels": 698368 } }, { "id": 20371, "url": "https://svs.gsfc.nasa.gov/20371/", "page_type": "Animation", "title": "BurstCube Animations", "description": "BurstCube is a mission under development at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. This CubeSat will detect short gamma-ray bursts, which are important sources for gravitational wave discoveries and multimessenger astronomy. The satellite is expected to launch in 2023. || ", "release_date": "2022-10-28T14:00:00-04:00", "update_date": "2023-05-03T11:43:54.376872-04:00", "main_image": { "id": 369461, "url": "https://svs.gsfc.nasa.gov/vis/a020000/a020300/a020371/BurstCube_360Y_30fps_4444ProRes.00001_print.jpg", "filename": "BurstCube_360Y_30fps_4444ProRes.00001_print.jpg", "media_type": "Image", "alt_text": "This animation rotates BustCube to reveal the spacecraft’s narrowest sides, as well as both sides of the solar panels. The panels will be folded down and latched until the satellite leaves the International Space Station, after which they will deploy. Look for the side displaying the BurstCube logo. Credit: NASA's Goddard Space Flight Center Conceptual Image Lab\r", "width": 1024, "height": 1280, "pixels": 1310720 } } ], "sources": [], "products": [], "newer_versions": [], "older_versions": [], "alternate_versions": [] }