\r
Credit: NASA/Sophia Roberts", "items": [ { "id": 416844, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088056, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration1080.01260_print.jpg", "filename": "BurstCube_MagneticCalibration1080.01260_print.jpg", "media_type": "Image", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 1024, "height": 576, "pixels": 589824 } }, { "id": 416845, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088057, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration1080.01260_searchweb.png", "filename": "BurstCube_MagneticCalibration1080.01260_searchweb.png", "media_type": "Image", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 320, "height": 180, "pixels": 57600 } }, { "id": 416846, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088058, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration1080.01260_web.png", "filename": "BurstCube_MagneticCalibration1080.01260_web.png", "media_type": "Image", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 320, "height": 180, "pixels": 57600 } }, { "id": 416847, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088059, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration1080.01260_thm.png", "filename": "BurstCube_MagneticCalibration1080.01260_thm.png", "media_type": "Image", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 80, "height": 40, "pixels": 3200 } }, { "id": 416854, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088066, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration1080.webm", "filename": "BurstCube_MagneticCalibration1080.webm", "media_type": "Movie", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 1920, "height": 1080, "pixels": 2073600 } }, { "id": 416839, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088051, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration1080.mp4", "filename": "BurstCube_MagneticCalibration1080.mp4", "media_type": "Movie", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 1920, "height": 1080, "pixels": 2073600 } }, { "id": 416838, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088050, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration_4k.mp4", "filename": "BurstCube_MagneticCalibration_4k.mp4", "media_type": "Movie", "alt_text": "The BurstCube mission team visits the magnetic calibration chamber at NASA’s Wallops Flight Facility in Virginia, in this video. The first shot shows the exterior of the building. The ensuing shots show the interior. The grey beams are made from carbon fiber and are held together by aluminum screws. The entire building is designed to avoid, as much as possible, any material that might generate a magnetic field. The fourth and fifth shots show engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) lifting BurstCube out of its travel case while Benjamin Gauvain (NASA) looks on. In the sixth shot, engineers remove BurstCube – within another protective case – from a foil bag designed to avoid electrostatic discharge. In the seventh shot, Clavette sets up equipment for monitoring the spacecraft. In the eighth shot, Rob Marshall (Peraton), an environmental testing lead, watches a readout on a computer monitor. In the ninth shot, Gauvin and Pavel Galchenko (NASA) watch and report on the calibration data coming from the spacecraft. The tenth shot is another view of Marshall looking at his computer monitor. The eleventh shot shows Clavette testing BurstCube ahead of calibration before Gasaway puts the protective lid back on over it. The twelfth shot shows Gasaway connecting more wires to the spacecraft. The thirteenth shot pans over the interior of the magnetic calibration chamber. The final shot shows one of the manuals engineers used during testing.\r\rCredit: NASA/Sophia Roberts", "width": 3840, "height": 2160, "pixels": 8294400 } } ], "extra_data": {} }, { "id": 373017, "url": "https://svs.gsfc.nasa.gov/14487/#media_group_373017", "widget": "Single image", "title": "", "caption": "", "description": "NASA engineers Kate Gasaway and Benjamin Gauvain prepare the BurstCube satellite for magnetic calibration testing at NASA’s Wallops Flight Facility in Virginia. Magnetic calibration maps the spacecraft’s magnetic field, information operators will need to orientate BurstCube once it’s in space.\r
\r
Credit: NASA/Sophia Roberts\r
\r
Alt text: Engineers work on the small BurstCube spacecraft. \r
\r
Descriptive text: The bottom half of this image shows two figures in long-sleeved blue jackets. On the left is a woman wearing pink pants, her hair is bound up in a clip. On the right is a bald man wearing glasses. Both lean over a table hosting a shiny box connected to many cables. They almost completely block from view a third person, a man with long black hair, also wearing a blue jacket. On the left of the image is a series of yellow railings. The top half of the image reveals the room is bracketed by gray framework.", "items": [ { "id": 416840, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088052, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration-07.jpg", "filename": "BurstCube_MagneticCalibration-07.jpg", "media_type": "Image", "alt_text": "NASA engineers Kate Gasaway and Benjamin Gauvain prepare the BurstCube satellite for magnetic calibration testing at NASA’s Wallops Flight Facility in Virginia. Magnetic calibration maps the spacecraft’s magnetic field, information operators will need to orientate BurstCube once it’s in space.\r\rCredit: NASA/Sophia Roberts\r\rAlt text: Engineers work on the small BurstCube spacecraft. \r\rDescriptive text: The bottom half of this image shows two figures in long-sleeved blue jackets. On the left is a woman wearing pink pants, her hair is bound up in a clip. On the right is a bald man wearing glasses. Both lean over a table hosting a shiny box connected to many cables. They almost completely block from view a third person, a man with long black hair, also wearing a blue jacket. On the left of the image is a series of yellow railings. The top half of the image reveals the room is bracketed by gray framework.", "width": 3648, "height": 5472, "pixels": 19961856 } } ], "extra_data": {} }, { "id": 373018, "url": "https://svs.gsfc.nasa.gov/14487/#media_group_373018", "widget": "Single image", "title": "", "caption": "", "description": "NASA engineer Kate Gasaway goes through a checklist ahead of BurstCube’s magnetic calibration testing at NASA’s Wallops Flight Facility in Virginia. \r
\r
Credit: NASA/Sophia Roberts\r
\r
Alt-text: An engineer fills out a form on a table hosting a small shiny spacecraft.\r
\r
Descriptive text: This image shows a woman wearing a long-sleeved blue jacket and blue gloves. Her hair is bound up in a clip. She leans over a table, filling out a form. To the right, on the same table, is a shiny box within another clear box – the BurstCube satellite in its protective case. The dim room behind the woman is full of grey beams that cast shadows against the walls. There is an old white barn door in the far wall. ", "items": [ { "id": 416841, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088053, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration-4.jpg", "filename": "BurstCube_MagneticCalibration-4.jpg", "media_type": "Image", "alt_text": "NASA engineer Kate Gasaway goes through a checklist ahead of BurstCube’s magnetic calibration testing at NASA’s Wallops Flight Facility in Virginia. \r\rCredit: NASA/Sophia Roberts\r\rAlt-text: An engineer fills out a form on a table hosting a small shiny spacecraft.\r\rDescriptive text: This image shows a woman wearing a long-sleeved blue jacket and blue gloves. Her hair is bound up in a clip. She leans over a table, filling out a form. To the right, on the same table, is a shiny box within another clear box – the BurstCube satellite in its protective case. The dim room behind the woman is full of grey beams that cast shadows against the walls. There is an old white barn door in the far wall. ", "width": 5155, "height": 3437, "pixels": 17717735 } } ], "extra_data": {} }, { "id": 373019, "url": "https://svs.gsfc.nasa.gov/14487/#media_group_373019", "widget": "Single image", "title": "", "caption": "", "description": "NASA engineers Benjamin Gauvain, Pavel Galchenko, and Kate Gasaway work on the BurstCube satellite in the magnetic calibration facility at NASA’s Wallops Flight Facility in Virginia.
Credit: NASA/Sophia Roberts
Alt text: Engineers work on the small BurstCube spacecraft.
Descriptive text: Three figures in long-sleeved blue jackets stand around a white table in a large room. On the table is a small, shiny, rectangular spacecraft in a clear plastic box. A pair of scissors and a roll of tape also sit on the table. One man looks at a device that is connected to the spacecraft by wires. A third figure in a teal shirt is mostly blocked from view by a woman with her hair up in a clip.", "items": [ { "id": 416842, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088054, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration-08.jpg", "filename": "BurstCube_MagneticCalibration-08.jpg", "media_type": "Image", "alt_text": "NASA engineers Benjamin Gauvain, Pavel Galchenko, and Kate Gasaway work on the BurstCube satellite in the magnetic calibration facility at NASA’s Wallops Flight Facility in Virginia. Credit: NASA/Sophia Roberts Alt text: Engineers work on the small BurstCube spacecraft. Descriptive text: Three figures in long-sleeved blue jackets stand around a white table in a large room. On the table is a small, shiny, rectangular spacecraft in a clear plastic box. A pair of scissors and a roll of tape also sit on the table. One man looks at a device that is connected to the spacecraft by wires. A third figure in a teal shirt is mostly blocked from view by a woman with her hair up in a clip.", "width": 5472, "height": 3648, "pixels": 19961856 } } ], "extra_data": {} }, { "id": 373020, "url": "https://svs.gsfc.nasa.gov/14487/#media_group_373020", "widget": "Single image", "title": "", "caption": "", "description": "Engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) prepare BurstCube for magnetic calibration testing at NASA’s Wallops Flight Facility in Virginia. The chamber is designed to generate a magnetic field that cancels out Earth’s, so mission teams can map the fields generated by their spacecraft without interference. \r
\r
Credit: NASA/Sophia Roberts\r
\r
Alt-text: Engineers work on the small BurstCube spacecraft.\r
\r
Descriptive text: The bottom half of this vertical image shows two figures, a man on the left and a woman on the right, in long-sleeved jackets. Both are looking down at a table hosting a shiny box on a piece of foil. The table stands over a section of floor painted yellow with diagonal black stripes. The top half of the picture reveals the room is bracketed by gray beams.", "items": [ { "id": 416843, "type": "media", "extra_data": null, "title": null, "caption": null, "instance": { "id": 1088055, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014487/BurstCube_MagneticCalibration-2.jpg", "filename": "BurstCube_MagneticCalibration-2.jpg", "media_type": "Image", "alt_text": "Engineers Kate Gasaway (NASA) and Justin Clavette (SSAI) prepare BurstCube for magnetic calibration testing at NASA’s Wallops Flight Facility in Virginia. The chamber is designed to generate a magnetic field that cancels out Earth’s, so mission teams can map the fields generated by their spacecraft without interference. \r\rCredit: NASA/Sophia Roberts\r\rAlt-text: Engineers work on the small BurstCube spacecraft.\r\rDescriptive text: The bottom half of this vertical image shows two figures, a man on the left and a woman on the right, in long-sleeved jackets. Both are looking down at a table hosting a shiny box on a piece of foil. The table stands over a section of floor painted yellow with diagonal black stripes. The top half of the picture reveals the room is bracketed by gray beams.", "width": 3648, "height": 5472, "pixels": 19961856 } } ], "extra_data": {} } ], "studio": "gms", "funding_sources": [ "PAO" ], "credits": [ { "role": "Producer", "people": [ { "name": "Sophia Roberts", "employer": "Advocates in Manpower Management, Inc." } ] }, { "role": "Science writer", "people": [ { "name": "Jeanette Kazmierczak", "employer": "University of Maryland College Park" } ] }, { "role": "Videographer", "people": [ { "name": "Sophia Roberts", "employer": "Advocates in Manpower Management, Inc." } ] } ], "missions": [ "CubeSats" ], "series": [ "Astrophysics B-Roll", "Astrophysics Stills" ], "tapes": [], "papers": [], "datasets": [], "nasa_science_categories": [ "Universe" ], "keywords": [ "Ast", "Astronomy", "Astrophysics", "CubeSat", "Gamma Ray", "Gamma Ray Burst", "Neutron Star", "Space" ], "recommended_pages": [], "related": [ { "id": 14608, "url": "https://svs.gsfc.nasa.gov/14608/", "page_type": "Produced Video", "title": "BurstCube Deploys from International Space Station", "description": "The shoebox-sized BurstCube and SNOOPI (Signals of Opportunity P-band Investigation) satellites entered low-Earth orbit from the International Space Station on April 18, 2024.BurstCube will study gamma-ray bursts, the universe’s most powerful explosions. SNOOPI will demonstrate technology for measuring soil moisture. These CubeSats launched to the space station aboard SpaceX’s 30th Commercial Resupply Services mission on March 21, 2024 || ", "release_date": "2024-06-24T13:00:00-04:00", "update_date": "2024-06-24T13:49:27.017597-04:00", "main_image": { "id": 1093823, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014600/a014608/BurstCube_Deployment_1_print.jpg", "filename": "BurstCube_Deployment_1_print.jpg", "media_type": "Image", "alt_text": "This time-lapse video, taken from the International Space Station, shows BurstCube and SNOOPI (Signals of Opportunity P-band Investigation) entering low-Earth orbit on April 18, 2024. BurstCube emerges first from the white deployer labeled “Nanoracks,” followed by SNOOPI. They begin to separate as they sail past one of the station’s solar arrays. \r\rCredit: NASA/Matthew Dominick\r\rAlt text: Time-lapse video of BurstCube and SNOOPI deployment. \r\rDescriptive text: This time-lapse video strings together photos taken from the International Space Station. Two black and gold boxes emerge from a larger white box labeled “Nanoracks.” They’re very close, but separate as they zoom past two long, rectangular, gold-and-black panels. Earth is in the background, a blue sky streaked with white clouds. The timelapse animation is a little choppy. \r", "width": 1024, "height": 575, "pixels": 588800 } }, { "id": 14488, "url": "https://svs.gsfc.nasa.gov/14488/", "page_type": "Produced Video", "title": "BurstCube Gets Its Solar Panels", "description": "Engineers work on the BurstCube mission’s solar panels in this video. The first shot pans across the spacecraft as it rests on a table, panels unfolded. The second shot starts close to the spacecraft, then pulls back. The third shot shows NASA engineers Julie Cox and Kate Gasaway attaching one of the panels. The fourth shot shows one of the unattached panels sitting on a piece of foil on a blue tabletop. The fifth shot is a wider view of the unattached panel with Cox in view. The sixth and seventh shots show Cox and Gasaway attaching the second panel to the other side of the spacecraft, from the side and above, respectively. The final shot shows a test deployment of the solar panels. Credit: NASA/Sophia Roberts || BurstCube_Solar_Panel_Install_4k.00060_print.jpg (1024x540) [110.8 KB] || BurstCube_Solar_Panel_Install_4k.00060_searchweb.png (320x180) [65.1 KB] || BurstCube_Solar_Panel_Install_4k.00060_thm.png (80x40) [5.4 KB] || BurstCube_Solar_Panel_Install_4k.webm (4096x2160) [28.3 MB] || BurstCube_Solar_Panel_Install_Clips4k_ProRes.mov (4096x2160) [7.6 GB] || BurstCube_Solar_Panel_Install_4k.mp4 (4096x2160) [1.0 GB] || ", "release_date": "2023-12-18T11:00:00-05:00", "update_date": "2023-12-18T11:44:11.281520-05:00", "main_image": { "id": 1088068, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014488/BurstCube_Solar_Panel_Install_4k.02520_print.jpg", "filename": "BurstCube_Solar_Panel_Install_4k.02520_print.jpg", "media_type": "Image", "alt_text": "", "width": 1024, "height": 540, "pixels": 552960 } }, { "id": 14489, "url": "https://svs.gsfc.nasa.gov/14489/", "page_type": "Produced Video", "title": "BurstCube Completes Thermal Vacuum Testing", "description": "BurstCube is a mission developed at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The spacecraft is slated for takeoff in March 2024 from NASA’s Kennedy Space Center in Florida aboard a resupply mission to the International Space Station. This CubeSat will detect short gamma-ray bursts, brief flashes of the highest-energy form of light. Dense stellar remnants called neutron stars create these bursts when they collide with other neutron stars or black holes. Short gamma-ray bursts, which last less than 2 seconds, are important sources for gravitational wave discoveries and multimessenger astronomy. As BurstCube orbits, it will experience major temperature swings every 90 minutes as it passes in and out of daylight. The team evaluated how the spacecraft will operate in these new conditions using a thermal vacuum chamber at Goddard, shown in these images and video, where temperatures ranged from minus 4 to 113 degrees Fahrenheit (minus 20 to 45 Celsius). || ", "release_date": "2023-12-18T11:00:00-05:00", "update_date": "2023-12-14T17:17:04.841411-05:00", "main_image": { "id": 1088082, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014489/BurstCube_ThermalVac_59.94_4k.00001_print.jpg", "filename": "BurstCube_ThermalVac_59.94_4k.00001_print.jpg", "media_type": "Image", "alt_text": "This video shows NASA engineers securing the BurstCube satellite in a thermal vacuum chamber for testing. The first shot shows a thermal vacuum chamber lab at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The second clip shows Julie Cox (NASA) and Seth Abramczyk (NASA) moving BurstCube, still in a clear protective case, from a table to the chamber platform. The next shot shows Cox and Abramczyk talking over the spacecraft, now without the covering. NASA engineers Franklin Robinson and Elliot Schwartz look on. In the fourth and fifth shots, all four engineers work to move BurstCube into position. In the sixth shot, Cox props one of the solar panels slightly open so they can test it when the spacecraft is in the chamber. In the next shot, Cox, Abramczyk, and Robinson make more adjustments. The eighth shot shows one side of BurstCube, which is engraved with the mission’s logo and the names of partner institutions. The following two clips show wider views of the spacecraft on the chamber platform. The eleventh shot shows Abramczyk and Cox typing at their computers. The twelfth shot shows a computer screen with a feed from a camera on the chamber platform. A smiling Abramczyk pops in and out of view. The thirteenth clip shows Cox deploying one solar panel with Abramczyk and Robinson in the background. The fourteenth shot shows Schwartz, Robinson, Abramczyk, and Colton Cohill (NASA) moving the top of the chamber into place. The fifteenth through nineteenth shots show the engineers steadying the lid as it lowers slowly into place. Shot twenty shows Schwartz securing the top of the lid. Shot twenty-one shows a pan of the sealed chamber. The final shot shows a data readout on a computer screen.\r\rCredit: NASA/Sophia Roberts", "width": 1024, "height": 540, "pixels": 552960 } }, { "id": 14490, "url": "https://svs.gsfc.nasa.gov/14490/", "page_type": "Produced Video", "title": "BurstCube Completes an Open-Sky Test", "description": "This video shows engineers conducting an open-sky test of the BurstCube satellite’s GPS at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The first shot shows Benjamin Nold (NASA) and Justin Clavette (SSAI) sitting around the spacecraft on a rooftop while Kate Gasaway (NASA) works in the background. The second shot shows Gasaway and Clavette looking at a laptop in the background, with BurstCube in the foreground. The third shot shows birds landing on an antenna on the rooftop. The fourth shot shows Clavette and Nold crouched next to the BurstCube satellite. The fifth shot shows Gasaway typing on the laptop. The sixth shot is a closer view of Gasaway and Clavette looking at the laptop. The eighth shot shows some of the electronics used to monitor the spacecraft. The ninth shot shows the data readout from the spacecraft on the laptop. The final shots show birds flying over the rooftop. Credit: NASA/Sophia Roberts || Open_Air_test_4k.01440_print.jpg (1024x540) [103.1 KB] || Open_Air_test_4k.01440_searchweb.png (320x180) [74.5 KB] || Open_Air_test_4k.01440_web.png (320x168) [70.2 KB] || Open_Air_test_4k.01440_thm.png (80x40) [5.8 KB] || Open_Air_test_4k.webm (4096x2160) [27.4 MB] || Open_Air_test_4k.mp4 (4096x2160) [891.4 MB] || BurstCube_Open_Air_test_4k_ProRes.mov (4096x2160) [6.5 GB] || ", "release_date": "2023-12-18T11:00:00-05:00", "update_date": "2023-12-18T12:04:44.846787-05:00", "main_image": { "id": 1088091, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014400/a014490/Open_Air_test_4k.01440_print.jpg", "filename": "Open_Air_test_4k.01440_print.jpg", "media_type": "Image", "alt_text": "This video shows engineers conducting an open-sky test of the BurstCube satellite’s GPS at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. The first shot shows Benjamin Nold (NASA) and Justin Clavette (SSAI) sitting around the spacecraft on a rooftop while Kate Gasaway (NASA) works in the background. The second shot shows Gasaway and Clavette looking at a laptop in the background, with BurstCube in the foreground. The third shot shows birds landing on an antenna on the rooftop. The fourth shot shows Clavette and Nold crouched next to the BurstCube satellite. The fifth shot shows Gasaway typing on the laptop. The sixth shot is a closer view of Gasaway and Clavette looking at the laptop. The eighth shot shows some of the electronics used to monitor the spacecraft. The ninth shot shows the data readout from the spacecraft on the laptop. The final shots show birds flying over the rooftop. \r\rCredit: NASA/Sophia Roberts", "width": 1024, "height": 540, "pixels": 552960 } }, { "id": 14167, "url": "https://svs.gsfc.nasa.gov/14167/", "page_type": "Produced Video", "title": "BurstCube Integration", "description": "BurstCube is a mission under development at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. This CubeSat will detect short gamma-ray bursts, which are important sources for gravitational wave discoveries and multimessenger astronomy. The satellite is expected to launch in March 2024. || ", "release_date": "2022-10-31T11:00:00-04:00", "update_date": "2023-12-15T11:44:00.427620-05:00", "main_image": { "id": 855111, "url": "https://svs.gsfc.nasa.gov/vis/a010000/a014100/a014167/1_-BurstCube_Chip_print.jpg", "filename": "1_-BurstCube_Chip_print.jpg", "media_type": "Image", "alt_text": "An individual circuit board rests on a lab bench. The BurstCube mission will use these boards to process data collected from gamma-ray bursts, the most energetic explosions in the cosmos. Credit: NASA/Sophia Roberts", "width": 1024, "height": 682, "pixels": 698368 } }, { "id": 20371, "url": "https://svs.gsfc.nasa.gov/20371/", "page_type": "Animation", "title": "BurstCube Animations", "description": "BurstCube is a mission under development at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. This CubeSat will detect short gamma-ray bursts, which are important sources for gravitational wave discoveries and multimessenger astronomy. The satellite is expected to launch in 2023. || ", "release_date": "2022-10-28T14:00:00-04:00", "update_date": "2023-05-03T11:43:54.376872-04:00", "main_image": { "id": 369461, "url": "https://svs.gsfc.nasa.gov/vis/a020000/a020300/a020371/BurstCube_360Y_30fps_4444ProRes.00001_print.jpg", "filename": "BurstCube_360Y_30fps_4444ProRes.00001_print.jpg", "media_type": "Image", "alt_text": "This animation rotates BustCube to reveal the spacecraft’s narrowest sides, as well as both sides of the solar panels. The panels will be folded down and latched until the satellite leaves the International Space Station, after which they will deploy. Look for the side displaying the BurstCube logo. Credit: NASA's Goddard Space Flight Center Conceptual Image Lab\r", "width": 1024, "height": 1280, "pixels": 1310720 } } ], "sources": [], "products": [], "newer_versions": [], "older_versions": [], "alternate_versions": [] }